RCA 2-9917/2-9918 - Manual (Page 4)

4
Modular Jack Requirements
You need an RJ11(CA11A) type modular
jack, which is the most common type of
phone jack and might look like the one
pictured here. If you don’t have a modular
jack, call your local phone company to find
out how to get one installed.
I
NTRODUCTION
Your GE 900 MHz Cordless Telephone is designed to give you flexibility in
use and high quality performance. To get the most from your new cordless
telephone, we suggest that you take a few minutes right now to read
through this instruction manual.
The following is important information regarding the use of your cordless
phone:
• Digital Security System
When you place the Handset in the base, the unit verifies it’s security code
which prevents false ringing from other cordless telephones. After a
power outage or battery replacement, you should place the Handset in the
base for about 20 seconds to reset the code.
• IMPORTANT: You Should Own a Non-Cordless Phone Too
Because cordless phones operate on electricity, you should have at least
one phone in your home that is not cordless, in case the power in your
home goes out.
• Installation Note
Some cordless telephones operate at frequencies that may cause
interference to nearby TVs and VCRs. To minimize or prevent such
interference, the base of the cordless telephone should not be placed near
or on top of a TV or VCR. If such interference continues, move the cordless
telephone farther away from the TV or VCR.