RIDGID RD80770 - Manual (Page 23)

3
WARRANTY
EVAPORATIVE EMISSION CONTROL WARRANTY STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS
Your new RIDGID
®
brand gasoline powered product complies with all applicable U.S. EPA, Environment Canada, and State
of California emissions regulations.
The evaporative emissions portion of this coverage, as described below, is provided by Techtronics Industries North America,
Inc. Separate emissions warranty coverage for other emissions related components is provided by the engine manufacturer,
as stated in a separate “Emission Control System Warranty” included with this product. Of course, this product also includes
a warranty that is not limited to emissions related components, as described elsewhere in this operator’s manual.
CALIFORNIA EVAPORATIVE EMISSION CONTROL WARRANTY STATEMENT
The California Air Resources Board and Techtronics Industries North America, Inc. , are pleased to explain the evaporative
emission control system’s warranty on your 007 model year pressure washer. In California, new equipment that uses small
off-engines must be designed, built, and equipped to meet the State’s stringent anti-smog standards. Techtronics Industries
North America, Inc. must warrant the evaporative emission control system on your pressure washer for the period listed
below, provided there has been no abuse, neglect or improper maintenance of your equipment.
Your evaporative emission control system may include parts such as: carburetors, fuel tanks, fuel lines, fuel caps, valves,
canisters, filters, vapor hoses, clamps, connectors, and other associated components. For engines less than or equal to
80 cc, only the fuel tank is subject to the evaporative emission control warranty requirements of this section.
MANUFACTURER’S WARRANTY COVERAGE:
This evaporative emission control system is warranted for two years. If any evaporative emission-related part on your equip-
ment is defective, the part will be repaired or replaced by Techtronics Industries North America, Inc.
OWNER’S WARRANTY RESPONSIBILITIES:
 As the pressure washer owner, you are responsible for performance of the required maintenance listed in your owner’s
manual. Techtronics Industries North America, Inc. recommends that you retain all receipts covering maintenance on your
pressure washer, but Techtronics Industries North America, Inc. cannot deny warranty solely for the lack of receipts.
 As the pressure washer owner, you should, however, be aware that Techtronics Industries North America, Inc. may deny
you warranty coverage if your pressure washer or a part has failed due to abuse, neglect, or improper maintenance or
unapproved modifications.
 You are responsible for presenting your pressure washer to a Techtronics Industries North America, Inc. distribution
center or service center as soon as the problem exists. The warranty repairs should be completed in a reasonable amount
of time, not to exceed 30 days.
If you have a question regarding your warranty coverage, you should contact Techtronics Industries, Inc., attn: Pressure
Washer Technical Service at (toll free) 1-866-539-1710.