On-Q/Legrand 364732-01 - Manual (Page 30)

27
301 Fulling Mill Road, Suite G ©Copyright 2004 by OnQ Technologies, Inc All Rights Reserved.
Middletown, PA 17057 www.onqhome.com
(800)-321-2343
Innovations in Home Living.
2. Save Configuration
This function (see Figure 22) enables users to always save the current configurations as a file (i.e.
config.sav), so that no re-entry is required when users want to switch between various configurations.
To load a configuration from a file, enter the file name or click Browse… to find the file from your
computer.
Figure 22
Figure 23 Figure 24
SAVE Click SAVE to save the current configuration to file.
UNDO Click to clear the input.
LOAD
Click to start loading configuration from file when you are done with the previous
settings.
When prompted (see Figure 23), select “Save this file to disk”, and the Save As screen (see Figure 24)
will prompt you with a dialog box to enter the file name and the file location. Please note that the
configuration file is in a .sav format.
Load Configuration From File
File Path/Name
If you want to load a configuration file, enter the file name with the correct path and
then click on LOAD. Or click Browse… to select the file.