Omega Vehicle Security OMG-COMM232-PCI - Manual (Page 11)

Installation
Omega Engineering COMM+232.PCI Page 7
Installation
Operating System Installation
Windows 95/98/NT
Run Setup on Disk 2 of the Serial Utilities Software.
Windows 3.1x
Refer to the Win3x.hlp file in the \Win31 directory on Disk 1 of the Serial
Utilities Software.
DOS
Refer to the Readme.txt file found in the \DOS directory on Disk 1 of the
Serial Utilities Software.
Other Operating Systems
Refer to the appropriate directory on Disk 1 of the Serial Utilities Software.
Hardware Installation
The OMG-COMM+232.PCI can be installed in any of the PCI expansion slots
and contains several jumper straps for each port that must be set for proper
operation.
1.
Turn off PC power. Disconnect the power cord.
2. Remove the PC case cover.
3. Locate an available PCI slot and remove the blank metal slot cover.
4. Gently insert the OMG-COMM+232.PCI into the slot. Make sure that the
adapter is seated properly.
5. Replace the screw.
6. Replace the cover.
7. Connect the power cord.
Installation is complete.