Oregon Scientific VR383 User Manual
Page 7
ESP
AÑOL
ENGLISH
FRANÇAIS
DEUTSCH
POR
TUGUÊS
VR383 Manual-Eng (086-002906-020)
POR
TUGUÊS
ENGLISH
FRANÇAIS
DEUTSCH
IT
ALIANO
IT
ALIANO
ESP
AÑOL
10
11
“FULL” Displayed On-Screen
In the following circumstances, the word “FULL” will be displayed:
•
Pressing REC when the memory is already full.
•
Pressing REC when the current folder already has
99 stored messages.
•
During recording, the memory is used up.
•
Pressing MODE/INDEX during recording when there
are already 99 indexes saved in the current folder.
Delete messages or indexes to make extra room for
recording or indexing.
Playing Back Messages
When the unit is in Recorder Mode, and the device is not in the midst of a recording,
the LCD screen will show the current message that you are accessing. It will also
display the total number of messages stored in the current folder. To play back the messages:
1. Press SKIP to access the next message stored. Press REVIEW to access the
previous message stored.
2. When you have selected a message, press PLAY to start the playback.
Functions During Playback
During the playback of messages, the voice recorder can perform a number of dif-
ferent functions:
Functions
Descriptions
Display Remaining Playback Time
Press DISP/SET during playback.
Adjust Volume
Press VOL+ or VOL-.
Skip to Previous Message
Press REVIEW during the 1st second of
the current message’s playback.
Replay Current Message
Press REVIEW after a second of playback.
Skip to Next Message
Press SKIP.
Scanning Forward through
Press and hold SKIP.
Current Message
Scanning Backwards through
Press and hold REVIEW.
Current Message
Playing Back Indexed Messages
During the playback of an indexed message, the functions will differ slightly from normal:
Functions
Descriptions
Skip to Previous Index
Press REVIEW during the 1st second of the current
message’s playback. If the current index is at the
beginning of a message, pressing REVIEW will
playback the message from the start.
Replay Current Index
Press REVIEW after a second of playback.
Skip to Next Index
Press SKIP.
Section Repeat Playback
When a message is playing back, you can choose to repeat a selected section of the message.
Press
MODE/INDEX
Press
MODE/INDEX
2. Start of the section to
be repeated is marked.
3. End of the section to be
repeated is marked.
1. Device plays back
a message.
4. Selected section is
automatically looped
repeatedly.
5. Section repeat stopped.
Device continues
normal playback.
Press
MODE/INDEX
Wait 1 second