Outback Power Systems Excel 100 - Manual (Page 11)

11
C4
Slide a wheel (C4) and secure it
with a M8 Locknut (D6). Repeat for
the other side before standing it up.
C5
D8
Insert the axle (C5) through the clamping
brackets underneath the Gas Cylinder Holder
(C3) and tighten the clamping screws. Taking
care not to over tighten.
Slide a Wheel Spacer (D8) over the Axle (C5).
C3
6
5
Excel 100 Excel 200 Excel 300
Excel 100 Excel 200 Excel 300
D6
D1
A16
Attach the Body Support (A16) to the
legs using the screws (D1).
Note: The securing tabs on the end of
the supports should face away from the
barbecue as shown in the diagram.