Oki lan 8100e - Manual (Page 38)

OkiLAN 8100e Network User’s Guide
Configuration - 38
SNMP Tab
This allows you to configure SNMP related items.
bmp31.bmp
Location Comments
Authentic
Community This community name is used to check whether incoming
SNMP requests have the correct community name or not.
The community name is displayed as ****** for security
reasons.
TRAP
Community This community name is assigned to outgoing system traps
such as cold start, authentication failure, etc.
TRAP Address Set a destination IP address of a Trap packet. If 0.0.0.0 is
set, the Trap is disabled.
SysContact Set SysContact (printer manager) name.
SysName Set SysName (printer model name).
SysLocation Set SysLocation (the location where the printer is
installed).
Default TTL Set TTL (Time To Live) value.
Enable
Authentic Trap Set Authentic Trap to enabled/disabled.