Oregon Scientific Weahter Light BAR210 - Manual (Page 5)

E
N
5
2. Press or to change the settings.
3. Press CLOCK to confi rm.
4. The settings order is: time zone offset, 12/24 hr
format, hour and minute.
BAR210 / BAR210U: Time zone offset sets the clock
+/- 23 hours from the received clock signal time. If you
have deactivated the clock signal reception, do not set
a value for time zone offset.
BAR210A: Select the time zone: (0) Pacifi c, (1)
Mountain (2) Central or, (3) Eastern.
CHANGE DISPLAY
• To change to auto toggle mode (clock > outdoor
temperature > indoor temperature), slide AUTO ON
/ OFF to ON.
• To manually toggle between time and temperature
displays, press CLOCK or wave your hand at least
3 inches or less from the motion sensor located on
the top of the main unit.
NOTE Auto toggle mode and motion sensor will be
disabled if a button is pressed, but will be enabled
again if no button is pressed for 5 seconds.
NOTE The installed CDS light sensor inside the unit
will activate automatic LCD dimming.
WEATHER FORECAST
This product forecasts the next 12 to 24 hours of
weather.
ICON
COLOR Red Green Blue
MEANING Sunny Cloudy Rainy
TEMPERATURE
To display temperature mode or select temperature
unit:
Press °C / °F.
NOTE Please keep the temperature sensor (adjacent
to the adaptor socket) away from electrical devices
as heat from these devices will affect accurate indoor
temperature readings.
BAR210 EN R8.indd 5 2/15/08 12:10:34 PM