Amplified trumpet, Amp-04trp – amplifier 04trp – speaker – OWI AMP-04TRP User Manual

Page 2

Advertising
background image

MODEL NUMBER

AMP-04TRP

POWER

25 Watts

FREQUENCY RESPONSE

20 Hz to 30kHz +0-2dB

NOISE FLOOR

Better than 90 dB

DISTORTION

Better than .1% at 10 Watts

INPUT

Line Input -10 to +4dB

INPUT CONFIGURATION

Differential, Balanced and DC Isolated

VOLUME CONTROL

Step for Mechanical Level Memory

PROTECTION

Short Circuit, Heat and Over Current

MAXIMUM POWER SUPPLY

400 Ft. with 16 Gauge Wire

WIRE LENGTH
COLOR

White

MULTIPLE AMPLIFIERS

Yes, Line Input in Parallel

EACH AMPLIFIER MAY POWER

Four Speaker Total per Amp

INPUT / OUTPUT

Each Amplifier has a Line Level
Input and Output

CONNECTOR TYPE

Phoenix Connector

CONDUIT ENTRY

Two

1

/

2

" Conduit Access Holes

with Knock Outs

TYPICAL LINE LEVEL SOURCES

CD Player, Audio Mixer, Background
Music Service, Telephone PBX Dry Audio Pair
Hooked to the Balanced +,- Input. There is
No Shield on a Telephone Input.

HOOK UP FOR ADDITIONAL HORNS

Wired through the Conduit Entry,
Use the 4 Way Binding Posts for Additional
High Level Speakers Hooked up to the Amplifier.

FOR FOUR HORNS

Wire them Series Parallel to Achieve a
4 Ohm Load Impedance

POWER SUPPLY

12 Volts

WARRANTY

1 Year

ARCHITECTS AND ENGINEERS

SPECIFICATIONS / TECHNICAL DATA

AMPLIFIED TRUMPET

GENERAL SPECIFICATIONS

www.owi-inc.com

OWI, Inc.

17141 Kingsview Ave.

Carson, CA 90746-1207

Tel: 310.515.1900

Fax: 310.515.1606

[email protected]

The optional amplifier is housed in an all metal cap with electronics inside. It resembles the original plastic cap but with metal to allow

a convenient heat sink for the internal amplifier. While an AC 12 Volt power supply is provided, it is capable of being powered by a DC or
AC power supply with a voltage not to exceed 16 volts. A power supply of up to 4 amps is suitable. The amplifier accepts a balanced
audio input for maximum noise rejection. It has a high quality powder coat providing maximum durability. The power kit comes with
mounting screws to replace the existing plastic cover plate of the Trumpet Speaker (04-TRP).

MODEL NUMBER

04-TRP

SYSTEM TYPE

Full Range

SPEAKER DRIVER

4" Polypropylene Coated

OUTDOOR / INDOOR

Yes

FREQUENCY RESPONSE

MUSIC

140 Hz – 20 kHz

SPEECH

250 Hz – 3 kHz

CROSSOVER

4 kHz

IMPEDANCE

4 Ohms

SENSITIVITY (1W, 1M)

90 dB

POWER HANDLING

80 Watts Max
40 Watts RMS

DISPERSION COVERAGE

120° H x 90° V

ENCLOSURE

ABS Plastic

GRILL

Aluminum

OPERATING TEMP.

14° F to 176° F
(-10° C to 80° C)

DIMENSIONS: HWD

5.9" H x 9.8" W x 10" D

PRODUCT WEIGHT

4.98 Lbs. (2.26 kG)

THROW (DISTANCE)

60 Feet

COLOR

Paintable White

MOUNTING HARDWARE

Unique "C" Bracket
(Included)

TERMINAL COVER PLATE (Included)
SECURITY CABLE

(Included)

PAINTABLE

Yes

WARRANTY

5 Years

AMP-04TRP – AMPLIFIER

04TRP – SPEAKER

Silencer

Options Available:

Silencer AMP-MOVC (Mono Volume Control)
Silencer AMP-STVC (Stereo Volume Control)
Amplifed Trumpet AMP-04TRP

Advertising