Oregon Scientific RMR203HGA User Manual

Page 2

Advertising
background image

When disposing of this product, ensure it is collected
separately for special treatment.

Placement of this product on certain types of wood
may result in damage to its finish for which Oregon
Scientific will not be responsible. Consult the furniture
manufacturer's care instructions for information.

The contents of this manual may not be reproduced
without the permission of the manufacturer.

Do not dispose old batteries as unsorted municipal
waste. Collection of such waste separately for special
treatment is necessary.

Please note that some units are equipped with a
battery safety strip. Remove the strip from the battery
compartment before first use.

The technical specifications for this product and the

contents of the user manual are subject to change without
notice.

SPECIFICATIONS

TYPE

DESCRIPTION

MAIN UNIT

L x W x H

73 x 47 x 132.5 mm

(2.87 x 1.85 x 5.22 in)

Weight

241 g (8.5 oz)

without battery

Temperature range

-5°C to 50°C (23°F to 122°F)

Resolution

0.1°C (0.2°F)

Signal frequency

433 MHz

Humidity range

25% - 95%

Humidity resolution

1%

Power

2 x UM-3 (AA) 1.5 V batteries

REMOTE UNIT (THN132N)

L x W x H

96 x 50 x 22 mm

(3.78 x 1.97 x 0.87 in)

Weight

62 g (2.22 ounces)

Transmission range

30 m (98 ft) unobstructed

Temperature range

-20°C to 60°C (-4°F to 140°F)

Power

1 x UM-3 (AA) 1.5 V batteries

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientific.com) to learn more
about Oregon Scientific products. If you’re in the US and
would like to contact our Customer Care department directly,
please visit: www2.oregonscientific.com/service/support

OR

Call 1-800-853-8883.

For international inquiries, please visit: www2.oregonscientific.
com/about/international

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This
device must accept any interference received, including
interference that may cause undesired operation.

WARNING Changes or modifications not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.

NOTE This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation.

This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and
receiver.

Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

Consult the dealer or an experienced radio / TV
technician for help.

DECLARATION OF CONFORMITY

The following information is not to be used as contact for
support or sales. Please call our customer service number
(listed on our website at www.oregonscientific.com, or on the
warranty card for this product) for all inquiries instead.

We

Name:

Oregon Scientific, Inc.

Address:

19861 SW 95

th

Ave.,Tualatin,

Oregon 97062 USA

Telephone No.:

1-800-853-8883

declare that the product

Product No.:

RMR203HGA

Product Name:

Temperature and Humidity

Station with Atomic Time

Manufacturer:

IDT Technology Limited

Address:

Block C, 9/F, Kaiser Estate,

Phase 1,41 Man Yue St.,

Hung Hom, Kowloon,

Hong Kong

is in conformity with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: 1) This device may
not cause harmful interference. 2) This device must accept
any interference received, including interference that may
cause undesired operation.

© 2007 Oregon Scientific. All rights reserved.

P/N: 086L004999-013

RMR203HGA_M_EN_R2.indd 2

2007.6.21 9:49:09 AM

P/N:086L004999-013

REV1

2

/2

Advertising