Opticon Laser Scanner - Manual (Page 2)

always scanning for new ID's
Electrical specifications
Optical specifications
Identification
Functionality
Environmental specifications
Physical specifications
Stand
Regulatory
Voltage requirement 5V ± 10 %
Current concumption 730 mA max
(at reading, communication off)
Idle current 500 mA max
Light source 650 nm visible laser diode
Scan method rotating polygon mirror, Pattern of 4 parallel
lines in 5 orientations (20 scan lines)
Scan rate 1000 scans/sec
Decode rate 1000 decodes/sec
Reading skew angle +8 - +50°, -8 - -50°
(at EAN13 PCS0.9, resolution 0.33, 10%
skew, 70mm from window)
Reading rotation angle 360°
Reading tilt angle ± 35°
(at EAN13 PCS0.9, resolution 0.33, 10%
skew, 70mm from window)
Focal plane 70 mm from window
Curvature R>20 (at EAN8, resolution 0.26mm),
R>25 (at EAN13, resolution 0.26mm)
Min. Resolution at PCS 0.9 0.15 mm (6 mil)
Min. PCS value 0.45
Depth of field 40 - 230 mm, depending on reading
distance and bar code label resolution,
70 ~ 230 mm (EAN13 PCS0.9, resolution 0.66),
40 ~ 200 mm (EAN13 PCS0.9, resolution 0.33),
40 ~ 110 mm (EAN13 PCS0.9, resolution 0.20),
40 ~ 70 mm (EAN13 PCS0.9, resolution 0.15)
Supported barcode symbologies Chinese Post - Codabar ABC and CX -
Code 39 incl. full ASCII - Code 93 - Code
128 - EAN-8 incl. +2,+5 - EAN-13 incl. +2,+5
- EAN-128 - IATA - ISBN - ISSN - Industrial
2of5 - Interleaved 2of5 - Italian
Pharmaceutical - Matrix 2 of 5 - MSI/
Plessey - UK/Plessey - S-Code - Telepen -
TriOptic - UPC-A incl. +2,+5 - UPC-E incl.
+2,+5
Configuration over 300 parameters can be set
Available interfaces Keyboard Wedge: XT/AT and PS2, RS232,
USB
Temperature in operation 0 - +40 °C
Temperature in storage -40 - +60 °C
Humidity in operation 20 - 80 % (non condensing)
Shock vibration test 12 - 100 Hz with 2G for 1 hour
Humidity in storage 20 - 90 % (non condensing)
Ambient fluorescent light 3.000 lux max
Ambient white light 3.000 lux max
Ambient direct sun light 50.000 lux max
Shock drop test 1 m drop onto concrete surface
Dimensions (h x w x d) 100 x 71 x 79 mm
Case material ABS
Weight body 200 g
Cable length 2 mtr straight
Connector Keyboard Wedge DIN 5, MiniDIN 6 with external power
Connector RS232 DB9 F with external power
Connector USB USB-A with external power
Dimensions (h x w x d) 180 x 110 x 135 mm
Weight 380 g
Purpose Stand for variable mounting options
Laser safety class IEC 825, Class I laserproduct
EMC EN 55022, EN 55024
Copyright Opticon Sensors Europe B.V. All rights reserved. This information is subject to change without prior notice. Printed 1/16/04
Specifications
OPM 1736B Omnidirectional laser scanner
Opticon Sensors Europe B.V., Opaallaan 35, 2132 XV Hoofddorp , The Netherlands
phone: +31 (0)23-5692700 , fax: +31 (0)23-5638266, email: [email protected]
internet: www.opticon.nl (www.opticon-sensors.com)
res. 0.33
res. 0.66
0.2
0.15