Olympus Floppydisk Adapter MAFP-1E - Manual (Page 76)

76
E
Use the instructions in this section to learn how to operate the
Windows 3.1 version of the Floppydisk Adapter (hereinafter
referred to as FlashPath) Status Monitoring Program
(FLSHMON.EXE). This section also explains the meaning of
the messages displayed by the monitoring program.
Starting Flshmon.exe
To start Flshmon.exe.
1 Click [FlashPath Group] then [FlashPath Status Monitor].
2 After startup, an icon representing the program appears.
3 To open the Status window, double-click the icon.
Status Monitor icon
Flshmon.exe screen configuration
The standard flshmon.exe status window contains the
following information.
1 Caption
Shows the title of the window.
2 Status message display
Describes details of the current status in standard English.
Displays a message corresponding to the current operation
[During normal operation]
“FlashPath Status Monitor”
[When a status change is detected]
“FlashPath User Intervention Required.”
USING THE FLASHPATH STATUS MONITORING
PROGRAM (Windows 3.1 Version)