Setup, Initial setup – Olevia HD Multimedia Player ZP-500 User Manual
Page 8
8
Setup
Please check the battery of Remote Control first, and then start the initial setup.
Initial setup
When plugged in the power at the first time, after the booting logo, the setup page should display
to start the initial setting. The first item is the menu language. Please setup the menu language for
OSD. Use ▲▼ button to select the language and press “ENTER” to confirm.
Note:
Before beginning this process, if you want to connect HDMI, please connect it first and then
start the configuration.
The second item is to choose the resolution of the video output according to your TV set and the
connection between this play and TV set.
z
For HDMI TV set, the device detects the available resolution of your TV set and lists them on
screen. In the list of resolution, the available option is in white characters and the unsupported
one is in dark characters. We recommend you to select the option “HDMI Auto” which enables the
maximum resolution on your TV set.
z
For YPbPr output, the supported resolution is up to 1080i so select “1080i 50Hz” for PAL TV set or
“1080i 60Hz” for NTSC TV set for the maximum resolution. For TV set that doesn’t support HD
input, select “NTSC” or “PAL” for the SD video.
z
For CVBS output, choose “NTSC” for NTSC TV set or “PAL” for PAL TV set.
Note:
The CVBS is always output SD video no matter which resolution is chosen.