Optimus MICRO-37 - Manual (Page 30)

30
Modifying or tampering with the recorder’s
internal components can cause a malfunc-
tion and might invalidate the recorder’s
warranty. If your recorder is not operating
as it should, take it to your local Ra-
dioShack store for assistance.
CLEANING THE
TAPE-HANDLING PARTS
Dirt, dust, or particles of the tape’s coating
can accumulate on the tape heads and
other parts that the tape touches. This can
greatly reduce the performance of the re-
corder. Use the following cleaning proce-
dure after every 20 hours of recorder
operation.
1. Press STOP , remove the batteries, and
disconnect any other power source.
2. Press PLAY to expose the tape-han-
dling parts.
14-1164.fm Page 30 Wednesday, November 25, 1998 1:20 PM