Onkyo RC- 480M - Manual (Page 7)

69
Numeric keys
Numeric keys
Video cassette
recorder
operation
buttons
Operating your programmed remote controller
After entering a pre-programming by following the procedure
given above, the following modes become enabled for use. DVD MODE (DVD Player Mode)
Operations are the same as explained on page 65.
VCR MODE (VCR Mode)
1. Press the VCR MODE button.
The VCR button lights green.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your VCR.
The buttons given below have operations programmed
into them.
VCR : Turns on and off the VCR (and switches to the VCR mode)
CH : Changes selected preset channel
TV/VCR: Switches VCR input setting
: Play
: Stop
: Rewind
: Fast Forward
: Pause
0, 1 to 9, +10: Numeric keys
You may also use the following buttons:
VOL : Adjusts volume at TX-SR700/700E/600/600E
MUTING: Activates muting function at TX-SR700/700E/600/
600E
TV MODE (TV Mode)
1. Press the TV MODE button.
The TV button lights green.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your television.
The buttons given below have operations programmed
into them.
TV : Turns on and off the television (and switches to the TV mode)
CH : Changes television channel
TV/VCR: Switches television input setting
0, 1 to 9, +10: Numeric keys
ENTER: Confirm
VOL : Adjusts volume at television
MUTING: Activates muting function at television
VOL
MUTING
VCR MODE
TV/VCR
CH
VCR
VOL
MUTING TV/VCR
CH
TV MODE
ENTER
TV