Onkyo TX-DS656 - Manual (Page 19)

19
Selecting a Menu item
The on-screen setting is performed by using the cursor buttons and
the ENTER button on the remote controller. This applies to all the
setup items.
In the following procedure, use the remote controller unless otherwise
specified.
1. Press the ENTER button.
The Menu appears on the TV screen.
2. Select the desired item using the y or u cursor button.
You can select the following items:
"Input Selector"
Select the channels from which video and sound
signals are input.
"Rec Selector" Select the channels to which audio and/or
recording equipment is connected.
"Surround Setup" Select the desired surround mode and make
necessary surround setup.
"Screen Setup" Set up the screen according to you preferences.
"System Setup" Make necessary setting for your specific system
configuration.
3. Press the s cursor button to display the screen for the selected
item.
Ex. Screen Setup screen
4. Select the desired parameter using the y or u cursor button
and change the setting using the a or s cursor button.
5. When all of the required parameters have been set, press the
ENTER button.
6. Press the ENTER button.
The Menu disappears from the TV screen.
1
2
*** Menu ***
Input Selector
Rec Selector
Surround Setup
Screen Setup
System Setup
** Screen Setup **
Background
Color = BLUE-1
Superimpose
Mode = NORMAL
Immediate
Display = ON
Character Position
3
4
ENTER
ENTER
ENTER
*** Menu ***
Input Selector
Rec Selector
Surround Setup
Screen Setup
System Setup
5
ENTER
6
*** Menu ***
Input Selector
Rec Selector
Surround Setup
Screen Setup
System Setup
ENTER
ENTER ENTER
On-screen setting