Olevia LT32HVM Series - Manual (Page 22)

20
TV Installation and Connection Guide
Connecting to a PC with VGA
Connector
1.Using a D-Sub 15 pin cable, connect the VGA
output terminal of the PC to the TV's VGA signal
input terminal.
2.You may need to use a Stereo mini jack to RCA
L/R connectors to receive audio.
Connecting to a DVD Player or HD-
Receiver with a DVI/HDCP Cable
1.Using a DVI cable, connect the DVD's DVI output
terminal to the TV's DVI-HDCP input terminal.
2.Using an Audio cable, connect the DVD's Audio
OUT jacks to the TV's Audio IN jacks.
.
Note: HDCP is a copy protected digital connection
that receives analog or digital video signals from
equipment with DVI ouput that features the HDCP
function. DVI allows the transfer of digital
uncompressed data to the TV.
DVI technology is better than Component, S Video
or AV (composite) connections.
Note: DVI signal is purely digital and provides a
crystal clear technology better than component,
S-Video or Video connections. It is strongly
recommended to use this connection if you have
this function on your equipment.
Note: VGA and DVI/HDCP Connectors share the
same audio input
Disconnect all power sources before making
any connections.
Disconnect all power sources before making
any connections.
DVI / HDCP
R
L
Service
Port VGA
Rear of TV
Red White D-sub 15 pin cable
Rear of TV
DVI / HDCP
R
L
Service
Port VGA
Red White
DVI cable Audio cable with
stereo mini jack