OPPO Digital OPPO DV-980H - Manual (Page 14)

I N S T A L L A T I O N
10
DVI Connection
HDMI - DVI
Cable
Composite Video Cable
S-Video Cable (Optional)
(Included, Optional)
S-Video
DVI
Video In
Rear Panel
DVI
Audio
Audio Cable
Method 2 – DVI Connection to TV
• If your TV has a DVI input, you can purchase an HDMI-DVI adapter cable to connect the DVD
player to the TV. This connection method delivers digital video to the TV without any signal
degradation. The HDMI video output of the OPPO DVD player presents the highest possible
resolutions and video quality.
• Please use the Red/White audio cables to connect the FRONT/MIXED audio output of the DVD
player to the TV. Make sure the audio cables are connected to the same input terminal group
on the TV as the DVI input. Usually the input terminals are marked as “DVI Audio” or “PC
Audio”. On some TVs you may need to use an RCA-3.5mm Mini-Jack adapter cable to connect
the audio.
• You may connect the composite video or S-Video cable to the TV for trouble-shooting purpose,
just in case there is a problem with DVI. However it is not recommended to use the composite
video or S-Video as the primary method of video delivery to the TV, because using it will lose
the advantage of video up-conversion and you will only get standard definition video.