Optimus 31-3036 - Manual (Page 21)

21
Using the Remote Control
The remote control works up to a distance of about 23 feet, and within a 30-
degree angle on either side of the receiver. Point the control at the receiver’s
front panel and press the desired button(s).
Many buttons on the remote control work the same as buttons on the receiver’s
front panel. Use these buttons exactly as you would use the corresponding but-
tons on the receiver.
AUDIO • SURROUND Switch
Set the switch to AUDIO to control audio components such as CD players or
cassette decks. Set the switch to SURROUND when setting the surround sound
options.
When you set the switch to SURROUND , dual-function buttons control the func-
tion marked in gold next to the button. For example, the button marked TEST
TONE and RETURN operates as the test tone function when you set the switch to
SURROUND and returns the system to default settings when you set the switch
to AUDIO .
Receiver/Amplifier Section
FUNCTION Selects a program source (VCR/Tape 1, LD/DVD, CD, tuner,
or phono). Repeatedly press FUNCTION until the display
shows your desired program source. See Page 14.
– MASTER VOLUME + Adjusts the system’s volume. See Page 14.
CENTER MODE Selects among the three center modes or 3CH Logic. See
Page 21.
– CENTER LEVEL + Controls the relative volume of the center speaker with
AUDIO
• SURROUND set to AUDIO. See Page 21.
– REAR LEVEL + Controls the relative volume of the rear speakers with
AUDIO
•
SURROUND set to SURROUND. See Page 21.
TEST TONE Sounds test tones from each speaker with AUDIO
• SUR-
ROUND set to SURROUND. See Page 21.
DELAY TIME Sets the rear-channel delay for Dolby Pro-Logic Surround
and Simulated Surround programs with AUDIO
•
SURROUND
set to SURROUND. See Page 21.
SURR MODE Selects between Dolby Pro-Logic Surround or Simulated Sur-
round sound. See Page 20.
RECEIVER POWER Turns the receiver on and off. See Page 14.
RETURN Returns the receiver to its default settings with AUDIO
•
SUR-
ROUND set to AUDIO. See Page 24.
TAPE 2 MONITOR Switches the receiver to monitor the source connected to the
TAPE 2 MONITOR jacks. See Page 18.
S. BASS Press to enhance bass sound with AUDIO
•
SURROUND set
to AUDIO.
MUTING Silences the receiver. Press again to restore the sound to its
previous level. See Page 15.
STATION Press to move the next higher or lower station in memory.
CLASS Press to select the class of the station in memory
FM MONO Press to disable the FM stereo mode to improve reception of
weaker FM stations.
Receive
Amplifie
Section
CD
SURROUND
ASMS
TAPE
POWER
RECEIVER CD TAPE
MASTER
VOLUME
RANDOM DISC BEST
AUDIO
DECK1 DECK2
STATION
REAR
LEVEL
FM MONO
FUNCTION
CENTER LEVEL
CLASS
TAPE2
MONITOR
CENTER
MODE
MUTING
TEST TONE
RETURN
DELAY TIME
S.BASS
AUDIO/VIDEO
SYSTEM REMOTE OSR
SURR
MODE