Oki C8800 - Manual (Page 15)

15
Power Save Mode
Power Save sets how long the printer
waits before going into standby
mode. This saves energy, but the
printer requires time to warm up
when it receives a print job or if you
want to enter the menu and change
settings.
Setting the Power Save
Interval
1. Press + repeatedly until you see
SYSTEM CONFIG MENU on the
display.
2. Press E
NTER
.
POW SAVE TIME
60 MIN *
3. Press E
NTER
.
The second line of the display
starts blinking.
4. Press + repeatedly until the value
you wish to select (5, 15, 30, 60
[default], or 240 minutes)
appears on the display.
5. Press E
NTER
twice.
The new setting is engaged and
the second line of the display stops
blinking.
6. Press O
N
L
INE
.
Disabling (or Re-enabling)
Power Save
The printer comes set for Power Save
enabled. To disable (or enable) Power
Save
1. Press E
NTER
to enter the Menu
mode.
2. Press - repeatedly until you see
MAINTENANCE MENU on the
display.
3. Press E
NTER
.
4. Press + repeatedly until you see
POWER SAVE
ENABLE *
5. Press E
NTER
.
The second line of the display
starts blinking.
6. Press + to toggle back and forth
between DISABLE and ENBABLE.
7. Press E
NTER
twice.
The new setting is engaged and
the second line of the display stops
blinking.
8. Press O
N
L
INE
.