Onkyo C-1VL - Manual

Catalog No. 05C09
Printed in Japan
01-0506-10.2K-DT GB
“VLSC” is a trademark of Onkyo Corporation.
Due to a policy of continuous product improvement, features and specifications are subject to
change without notice. Onkyo Corporation
2-1 Nisshin-cho, Neyagawa-shi, Osaka 572-8540, JAPAN
Tel: 81-72-831-8136 Fax: 81-72-833-5222 http://www.onkyo.com/
Onkyo Europe Electronics GmbH
Liegnitzerstrasse 6, 82194 Grobenzell, GERMANY
Tel: 49-8142-4401-0 Fax: 49-8142-4401-555 http://www.eu.onkyo.com/
Onkyo UK Office
Suite 1, Gregories Court, Gregories Road, Beaconsfield, Buckinghamshire HP9 1HQ,
UNITED KINGDOM
Tel: 44-1494-681515 Fax: 44-1494-680452 http://www.onkyo.co.uk/
Onkyo China Limited
Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung, N.T., HONG KONG,
SAR of China
Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.ch.onkyo.com/
A-1VL
C-1VL
• Exclusive Onkyo VL Digital Technology
• Separate Toroidal Transformers for L/R Channels
• High-Grade, Banana-Plug Compatible,Transparent
Speaker Posts
• Low-Impedance, Copper Bus Plates
• Audiophile-Grade Parts
• Linear Motor Volume Control
• Brass Insulators
• Brass Pin Jacks
• Heavy-Duty Inlet Power Cord
• Rugged Chassis to Prevent Vibrations
• Full-Function Remote Control
[Amplifier Section]
•Power output: 100 W + 100 W (8
Ω , 1 kHz, DIN) •Dynamic power: 310 W + 310 W (3 Ω ), 240 W + 240 W (4 Ω ), 130 W +
130 W (8 Ω ) •THD (Total Harmonic Distortion): 0.08% (1 kHz, 1 W) •Damping factor: 25 (front, 1 kHz, 8 Ω ) •Input sensitivity
and impedance: 200 mV/50 k Ω (LINE), 2.5 mV/50 k Ω (PHONO) •Output level and impedance: 200 mV/2.2 k Ω (REC OUT)
•Phono overload: 130 mV (MM, 1 kHz, 0.5% THD) •Frequency response: 10 Hz–60 kHz (LINE, +1 dB/-3 dB) •S/N ratio: 100 dB
(CD, IHF-A), 70 dB (PHONO, IHF-A) •Speaker impedance: 4
Ω –16 Ω
[General]
•Power supply: AC 230–240 V, 50 Hz •Power consumption: 105 W •Dimensions (WHD): 435 x 81.5 x 390 mm •Weight: 11.3 kg
[Audio Section]
•Frequency response: 5 Hz–20 kHz •S/N ratio: 110 dB •Dynamic range: 96 dB •THD (Total Harmonic Distortion): 0.002% (1 kHz)
•Output level and impedance: -22.5 dBm (digital optical), 0.5 V p-p/75
Ω (digital coaxial), 2.0 V/320 Ω (analog)
[General]
•Power supply: AC 230–240 V, 50 Hz •Power consumption: 9 W •Dimensions (WHD): 435 x 81.5 x 356 mm •Weight: 6.8 kg
• High-Precision Clock (±1.5 ppm)
• VLSC (Vector Linear Shaping Circuitry)
• 192 kHz/24-Bit Wolfson
® D/A Converters
• Direct Digital Path
• Digital Out On/Off
• Brass Insulators
• Brass Pin Jacks
• Heavy-Duty Inlet Power Cord
• High-Grade Pin Cable Included
• 3 Digital Outputs (2 Optical/1 Coaxial)
• Rugged Chassis to Prevent Vibrations
• Remote Control
Caution
To enjoy proper and safe operation, please read the user manual before use. Do not install this
product where it may be exposed to excessive water, humidity, steam, dust or oily smoke. This
may lead to electric shock or malfunction.
VL Digital — Hear What You've
Been Searching For
Integrated Digital Stereo Amplifier
A-1VL /C-1VL
Audiophile-Grade CD Player
A1VL_C1VL_teiD-7/1 05.7.21 0:39 PM Page 2