Oregon 91VX - Manual (Page 2)

For more information on these and other Oregon® products, contact your authorized Oregon® distributor, or:
OREGON CUTTING SYSTEMS DIVISION, BLOUNT, INC. PO Box 22127 · Portland, OR, U.S.A. 97269-2127
Phone: 503-653-8881 Fax: 503-653-4201 Web: http://www.oregonchain.com
IN CANADA: OREGON DISTRIBUTION LTD. 505 Edinburgh Rd. N., Guelph, Ontario, Canada N1H 6L4
Phone: 519-822-6870 Fax: 519-822-4999 Printed in USA 91VX F&B A107040 AB 1007
Oregon® 91 VX saw chains may be capable of kickback that could
result in serious injury to the saw operator or bystanders.
Although these chains have features designed to reduce kickback energies, these
are NOT low-kickback chains. Do not use Oregon® 91 VX chains unless you have experi-
ence and specialized training for
dealing with kickback. Saw chain with lower kickback
potential is available.
Failure to follow filing instructions can
increase the level of kickback which
can result in severe injury to the saw operator or bystanders.
* Do not exceed the depth-gauge setting shown above
* Always file depth gauges back to their original rounded
or ramped shape after lowering
If you cut abrasive woods such as railroad ties, or if you cut in the following
kinds of locations: sandy areas, partially logged areas after skidder extrac-
tion, fire-damaged areas, or any place where the wood has become dirty
– then you may prefer the MultiCut ™ versions of Oregon ® chains. MultiCut ™
chains have extra-heavy-duty chrome plating applied with an advanced
plating process to withstand these kinds of tough dirty conditions. Contact
Oregon ® or your authorized Oregon ® distributor for further information on
MultiCut ™ chains.
DO YOU CUT WOOD IN DIRTY OR ABRASIVE CONDITIONS?
Chain Replacement Parts
Chain Type Left-hand Cutter Right-hand Cutter Tie Strap Preset Tie Strap Drive Link
91VX P21693 (25-PK) P21694 (25-PK) P24295 (25-PK) P25068 (25-PK) P21721 (25-PK)
Maintenance Tools
File Size Assembled File
Guide
Round Files Depth Gauge
Tool, .025"
Flat File Grinding Wheel
5 3/4" Diameter
Grinding Wheel
4 1/8" Diameter
5/32" (4mm) 37534 (EA.) 70504 (12-PK.)
40459 (2-PK.) 22290 (10-PK.) 12211 (12-PK.) OR534-18
1/8" Thick OR4125-18
1/8" Thick
Standard
Chain Part No.
Multicut
Part No.
91VX M91VX
FILING
INSTRUCTIONS
A B C D
TOp pLaTe aNGLe DOWN aNGLe* DepTh GaUGe SeTTING FINISheD CUTTeR
GRINDING
INSTRUCTIONS
VISe ROTaTe aNGLe VISe TILT aNGLe heaD TILT aNGLe DepTh GaUGe SeTTING FINISheD CUTTeR
When using an Oregon® file guide, ALWAYS hold it level, 0°, flat on the Top Plate.
*
*
30º
30º
0º
0º
.025"
.025"
55º