Optiview DVR - Manual (Page 23)

User’s Manual
18
Date Display Mode
This function allows user to set the OSD display type of the date / time.
There are three options to select from: <Y/M/D>, <M/D/Y> or <D/M/Y>.
“Y” represents “Year”, “M” represents “Month” and “D” represents “Day”.
The default setting is <Y/M/D> in both NTSC / PAL formats.
Time Display Mode
User can choose to set the time format to <12 hour> or <24 hour>. The
default setting is <24 hour>.
Date / Time Order
The item is used to set the order of date / time display to <Date First> or
<Time First>.
3.4.2 Daylight Saving Time
Daylight Saving Time
The item is for those people who live in certain regions to observe
Daylight Saving Time. Select <ON> to enable, or <OFF> to disable the
function.
If the function is disabled, the following items <DST Start>,<DST End>
and <DST Bias> will be grayed out and cannot be accessed.
NOTE: If this function is enabled, the date/time information will be
shown on the screen with a DST icon when playing back recorded
video or searching video in the event list. “S” indicates summer
time and “W” indicates wintertime.
DST Start / DST End
These two items are used to program the activate duration of daylight
saving time.
DST Bias
The item allows users to set the amount of time to move forward from the
standard time for daylight saving time. The available options are <30>,
<60>, <90> and <120> minutes.