Asus T3-P5G43 User Manual
Page 104
A-6
Appendix
7. Click Insert > Multiple driver folder to
select the AHCI folder, then click OK.
Select the driver path and click OK. Select
Intel(R) ICH10R SATA AHCI Controller
and click OK, then click Next. From the
confirmation message, click Yes. When
the process is finished, click Next.
8. From the Mode dropdown list, select
Create Image and click the Make
ISO button, then select the place
you what to save this ISO file to
and key in a name for the ISO file.
Click Save when done. When nLite
is finished creating the ISO image.
Click Next.
9. Click Finish to exit nLite.
10. Enable AHCI mode in BIOS settings, before installing Windows
®
XP.
Press <DEL> during the Power-On Self-Test (POST) to enter the BIOS setup.
From the Main menu, select Configure SATA as, then press <Enter>. Select
AHCI and press <Enter>. Press <F10> to save changes and exit BIOS setup.
System Time
[04: 49 : 02]
System Date
[Wed 07/09/2008]
SATA1
: [Not Detected]
SATA2
: [Not Detected]
SATA3
: [Not Detected]
SATA4
: [Not Detected]
Configure SATA as
[AHCI]
System Information
Options
IDE
AHCI