Sylvania DVR91DG User Manual

Dvr91dg, Owner’s manual, Dvd recorder

Advertising
background image

TO TV

CHANNEL

VIDEO IN

AUDIO IN

R

L

3

4

ANT IN

AC 120V

STEREO AUDIO/VIDEO

RF Modulator

(commercially available)

(Back of TV)

Antenna in jack

(commercially available)

ANTENNA

AUDIO IN

VIDEO IN

L

R

AUDIO OUT

VIDEO OUT

(L1)

IN

IN

OUT

OUT

S-VIDEO

COMPONENT

VIDEO OUTPUT

L

Y

P

B

/C

B

P

R

/C

R

R

(Back of This Unit)

Audio/Video cables

(supplied)

RF cable

RF cable

(supplied)

Antenna

Cable

TV signal

3

4

6

5

2

1

Set channel 3 or 4.

Turn on your TV
and select channel
3 or 4.

or

or

Note

• The quality of

picture may

become poor if this

unit is connected to

an RF modulator.

Recording

Playing

discs

Editing

Before

you

start

Connections

Getting

started

Changing

the

Setup

menu

Others

Español

Please read before using this equipment.

If you need additional operating assistance after reading this owner’s manual or to

order replacement accessories, please call

TOLL FREE : 1-800-605-8453

or visit our web site at http://www.SylvaniaConsumerElectronics.com

INSTRUCCIONES EN ESPAÑOL INCLUIDAS

Owner’s Manual

REC/OTR

REC SPEED

OPEN/CLOSE

CHANNEL

REV

FWD

STOP

PLAY

POWER

S-VIDEO

VIDEO

AUDIO

L

R

DVR91DG

Connection to a TV

(Before you use this unit, you need to complete connections.)

If your TV has AUDIO/VIDEO input jacks, see the section “Connections” on pages 13–15. If not, it is still possible to connect

this unit to your TV by using a Stereo Audio/Video RF modulator. In this case, follow the instructions below.

1) The antenna input jack of your TV may have been already occupied. If so, disconnect the RF cable from your TV, and then

connect the RF cable to the ANTENNA IN jack of this unit.

2) Connect the ANTENNA OUT jack of this unit to your RF modulator (usually marked “ANT IN”) by the RF cable.

3) Connect your RF modulator to your TV by another RF cable.

4) Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO/VIDEO input jacks of your RF modulator by Audio/Video

cables.

5) Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your

RF modulator has a Modulator/Antenna switch, set it according to your RF modulator’s manual.

6) Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.

For more details, follow the instructions supplied with the RF modulator.

DVD Recorder

To record a program easily, refer to “Easy DVD recording” on pages 16-17 after connections are completed.
(You CANNOT record on any copyright protected DVD disc with this unit.)

Recordable disc

• We strongly recommend using any DVD-R 8x, MAXELL DVD-R 16x and DVD-RW 4x

disc to assure good recording quality.

• Discs that have been tested and are proven to be compatible with this recorder:

VERBATIM DVD-R 8x

VERBATIM DVD-RW 2x

MAXELL DVD-R 16x

JVC DVD-RW 4x

DVR91DG_E7A01UD.indd 1

2006/02/15 17:25:53

Advertising
Table of contents