Operation, Recording your own greeting – Oricom AMPLIFIED DIGITAL ANSWERING SYSTEM AM900 User Manual

Page 10

Advertising
background image

8

Operation

Operation

Recording, changing or deleting the greeting message

For your outgoing greeting message (OGM), you can either use the pre-
recorded greeting or you can record your own message. If you do not
record a message, the standard greeting will be used automatically.
Before recording your greeting, you should write down the text that
you want to record. The length of your own greeting must be at least 5
seconds and must not exceed 5 minutes. The longer your greeting lasts,
the less recording time will be available for incoming messages. The
maximum recording time is 50 minutes less the length of the Greeting
Message.
Example of a greeting message: “Hello this is Simon. I am sorry but

we are not available to take your call at the moment. Please leave a

message after the tone.”

Recording your own greeting

Set the switch on the rear of the machine to ANS. Press and hold down
the REC button.
start your greeting directly after you hear a tone. The display will show

A1

during the recording. While recording, keep 15 cm from the answering
system so that you can speak into the microphone on the upper side.
Release the REC button after you have finish your greeting. The greeting

will now be repeated. The playback volume can be adjusted by repeatedly
pressing the

UP VOLUME and DOWN VOLUME buttons. You can play

back your greeting at any time by briefly pressing the REC button.

Advertising