OEM Systems 300 Watt Powered Subwoofer A-120 - Manual (Page 2)

(4) Spiked Feet (4) Knurled Lock Nuts (4) Rubber Feet
Frequency Response: 28Hz – 300Hz (System Response)
Crossover Frequency: 40Hz – 120Hz (Low-pass filter with bypass switch)
Phase Adjustment: 0 – 180 degrees (Continuously variable)
Amplifier Output Power: 300 watts, with thermal and clipping limiters
Audio Inputs:
Summing stereo line level (RCA x2)
LFE (RCA shared with Left input connector)
Speaker level (Stereo 5-way binding post)
Input Impedance: Line Level – 20k ohms, Unbalanced
Speaker Level – 220 ohms
Input Power: 120V 60Hz AC
Input Power Connection: IEC 2-wire receptacle with integral fuse holder
Power (Mains) Fuse:
3A 250V GMA style Fast Blow
Power Modes: Auto signal sensing and always on
Auto Off Delay: ~10 minutes
Dimensions: 15-3/8 '' W x 17-5/16 '' H x 14-3/4 '' D,
(390W x 440H x 375D)mm (without feet)
Weight:
43lbs (19.5kg)
Shipping Dimensions: 21 '' W x 20 '' H x 20 '' D, (533W x 508H x 508D)mm
Shipping Weight: 51lbs (23.2kg)
The A-120 is shipped with adjustable feet, (4 spiked and 4 rubber) with tool-less
knurled jam nuts. These feet can be installed in the bottom of the enclosure in
either a 3-point triangular pattern or more traditional 4-point square pattern.
The bottom of the enclosure has 5 threaded inserts arranged to accept either pattern.
S P E C I F I C A T I O N S
®
Loudspeakers for
Todays ARCHITECTURE
Presence
®
!
RISQUE DE CHOC ELETRIQUE
NE PAS OUVRIR
300 Watt RMS BASH Amplifier