Sylvania SRT2420P - Manual (Page 4)

[MPAA RATING SET UP]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel) ▲ or ▼ button to point to "V-CHIP SET UP".
Then, press the VOL(ume) ▲ button.
3) Use the number buttons to enter 4-digit access code. The default access
code is 0000. If you have not set up your personal access code, you should
use 0000.
4 Press the CH(annel) ▲ or ▼ button to point to "MPAA RATING".
Then, press the VOL(ume) ▲ button.
5) Press the CH(annel) ▲ or ▼ button to point to your desired item.
Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
● When you select the rating category and turn it to [BLOCK], the higher
rating will turn [BLOCK] automatically. Also, the lower rating will turn
[VIEW] automatically.
● When you turn "G" to [BLOCK] or [VIEW], the all ratings will turn to
[BLOCK] or [VIEW] automatically.
● When you turn "X" to [VIEW], the all ratings will turn to [VIEW] automatically.
6) Press the MENU button to exit the menu.
[TV RATING SET UP]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel) ▲ or ▼ button to point to "V-CHIP SET UP".
Then, press the VOL(ume) ▲ button.
3) Use the number buttons to enter 4-digit access code. The default access
code is 0000. If you have not set up your personal access code, you should
use 0000.
4) Press the CH(annel) ▲ or ▼ button to point to "TV RATING".
Then, press the VOL(ume) ▲ button.
5) Press the CH(annel) ▲ or ▼ button to point to your desired item.
Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
● When you select the rating category and turn it to [BLOCK], the higher rat-
ing will turn [BLOCK] automatically. Also, the lower rating will turn
[VIEW] automatically.
● When you turn "TV-Y" to [BLOCK] or [VIEW], then all ratings will turn to [BLOCK] or
[VIEW] automatically.
● When you turn "TV-MA" to [VIEW], then all ratings will turn to [VIEW] automatically.
● V-CHIP SET UP SUB RATINGS
When you select TV-Y7, TV-PG, TV-14, or TV-MA and you press the VOL(ume) ▲ button, the
sub-ratings will appear on the TV screen.
If you select the rating category (example: TV-PG) and turn it to [BLOCK] or
[VIEW], the sub-ratings (example: V for Violence) will turn [BLOCK] or
[VIEW] automatically.
You can set the sub-ratings to [BLOCK] or [VIEW] individually when the
rating category is set to [BLOCK]. To set the sub-ratings individually, follow
the steps below.
● When you select [TV-Y7]:
Press the CH(annel)
▲ or ▼ button to select "FV" (Fantasy Violence).
Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
● When you select [TV-PG], [TV-14] or [TV-MA]:
Press the CH(annel)
▲ or ▼ button to select "D"(Suggestive Dialog),
"L"(Coarse Language), "S"(Sexual Situation), or "V"(Violence).
Then, press the VOL(ume)
▲ button to select [BLOCK] or [VIEW].
Note: When you select [TV-MA], "D" does not appear on the TV screen.
● The sub-ratings which set to [BLOCK] appear next to the rating category in
the TV RATING menu.
6) Press the MENU button to exit the menu.
[V-CHIP ACCESS CODE]
To change access code, follow steps.
1) Press the MENU button, then press the CH(annel)
▲ or ▼ button to select
V-CHIP SET UP. Press the VOL(ume) ▲ button to continue.
2) Press the number buttons to enter your old access code. If you have never
set up your personal access code, use 0000.
3) Press the CH(annel) ▲ or ▼ button to select CHANGE CODE. Then, press
the VOL(ume) ▲ button to continue.
4) Use the number buttons to enter your desired access code in the NEW
CODE space. Then, enter the same code in the CONFIRM CODE space.
Your new access code is set. You will return to the "V-CHIP SET UP".
If the code in the CONFIRM CODE space does not match the code in the
NEW CODE space, repeat step 4, making sure you enter the same new code
exactly in the CONFIRM CODE space.
Notes:
• If a power failure occurs, the default code, 0000 will be the access code.
• If you connect the power cord to an AC outlet that is controlled by a wall
switch, your personal access code will be erased every time you turn off
the power at the wall switch. The default code will return to 0000.
[IF YOU FORGET YOUR ACCESS CODE]
You should restore the access code to 0000 as your access code, unplug the
TV’s power cord for 10 seconds, then plug it in again.
PICTURE
CHANNEL SET
[ENGLISH] ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
GENERAL SPECIFICATIONS
Television system: NTSC-M
TV Standard
Closed Caption
System:
§15.119/FCC
Channel coverage
VHF: 2 ~ 13
UHF: 14 ~ 69
CATV: 2 ~ 13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
Tuning System 181 channel
frequency synthesized
tuning system
Channel access: Direct access keyboard,
programmable
scan and up/down
Terminals
Antenna input: VHF/UHF/CATV
75 ohm unbalanced
(F-type)
Video input: RCA connector x 1
Audio input: RCA connector x 4
S-Video input: Mini DIN 4-pin jack
Headphone: 1/8” stereo (3.5mm)
Stereo Sound System
2 speakers
ELECTRICAL SPECIFICATIONS
Sound output: 1W, 8 ohm x2
OTHER SPECIFICATIONS
Remote control: Digital encoded
infrared light system
Operating
temperature:
5°C to 40°C
(41°F~104°F)
Power requirements: AC120V, 60Hz
Power consumption
(Maximum):
74W
Picture tube: 20"
Dimensions: H : 17-1/8” (435mm)
W: 19-15/16” (506mm)
D : 17-15/16” (455mm)
Weight: 44.1 lbs. (20kg)
• Designs and specifications are subject to
change without notice and without our
legal obligation.
• If there is a discrepancy between lan-
guages, the default language will be
English.
Remote control unit
(NE143UD)
Batteries ("AA" x 2)
SPECIFICATIONS
OPERATIONS (Continued)
MAINTENANCE
SUPPLIED ACCESSORIES
TROUBLESHOOTING GUIDE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-
looked possibilities. Before arranging for service, check these items. It could save you time and money.
QUICK SERVICE CHECK LIST
PROBLEM
POSSIBLE REMEDY
Remote Control Doesn’t Work Bars On Screen Picture Distorted Picture Rolls Vertically No Color Poor Reception on Some Channels Weak Picture Lines or Streaks in Picture Ghosts in picture Picture Blurred Sound OK, Picture Poor Picture OK, Sound Poor No Picture or Sound Different color marks on screen
Try a new channel, if OK, then possible station trouble.
Is TV plugged in?
Power at outlet?
Is TV's POWER button on?
Is antenna connected to terminal on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference.
Turn off with POWER button and then turn it on after about a minute.
Adjust COLOR control.
Adjust CONTRAST & BRIGHT control.
Check batteries in Remote Control.
Move the TV away from the nearby speakers and appliances which generate a
magnetic field.
Turn off using the POWER button, then turn it on again 30 minutes later or so.
Closed Caption Problem Possible Remedy
My TV is showing captions that are
misspelled.
My TV will not show the text in its entirety
or there is a delay of what is being said.
My captions are scrambled with white
boxes on the TV screen.
My program guide listed a TV show as
being closed captioned
but none of the captions were displayed.
My prerecorded videotape does not show
any captions. The tape box mentions it
being closed captioned.
My TV screen shows a black box on certain
channels.
You are watching a live broadcast and spelling errors made by the
closed captioning production company may pass through uncorrect-
ed. A prerecorded program will not show any misspelled words
because of the normal time available for editing the captions.
Captions that are delayed a few seconds behind the actual dialogue
are common for live broadcasts. Most captioning production compa-
nies can display a dialogue to a maximum of 220 words per minute.
If a dialogue exceeds that rate, selective editing is used to insure that
the captions remain up-to-date with the current TV screen dialogue.
Interference caused by building, power lines, thunderstorms, etc.
may cause scrambled or incomplete captions to appear.
Broadcasters may at times use a time compression process to the
actual program so that additional advertising time can be given.
Since the decoder cannot read the compressed information, captions
will be lost.
The videotape was either an illegal copy or the tape duplicating
company accidentally left out the captioning signals during the
copying process.
You are in the TEXT mode. Select CAPTION mode or CAPTION
[OFF].
As an E NERGY S TAR Partner, our company has determined that this product meets
the E NERGY S TAR guidelines for energy efficiency. E NERGY S TAR is a U.S. registered mark.
®
® ®
Owner’s Manual
(0EMN02409)
CABINET CLEANING
● Wipe the front panel and other exterior sur-
faces of the TV with a soft cloth immersed
in lukewarm water and wrung dry.
● Never use a solvent or alcohol. Do not spray
insecticide liquid near the TV. Such chemi-
cals may cause damage and discoloration to
the exposed surfaces.
PICTURE TUBE CLEANING
Wipe the picture tube of the TV with a soft
cloth. Before cleaning the picture tube, discon-
nect the power cord.
<Selection> <Rating Category Explanations>
• G: General Audience
• PG: Parental Guidance suggested
• PG-13: Unsuitable for children under 13
• R: Restricted; under 17 requires accompanying parent or adult guardian
• NC-17: No one under 17 admitted
• X: Mature audience only
<Selection> <Rating Category Explanations>
• TV-Y: Appropriate for all children
• TV-Y7: Appropriate for children seven and older
• TV-G: General Audience
• TV-PG: Parental Guidance suggested
• TV-14: Unsuitable for children under 14
• TV-MA: Mature audience only
TV-Y7 [BLOCK]
FV [BLOCK]
TV-PG [BLOCK]
D [BLOCK]
L [BLOCK]
S [BLOCK]
V [BLOCK]
TV-Y [VIEW]
TV-Y7 ( ) [VIEW]
TV-G [BLOCK]
TV-PG (DLSV) [BLOCK]
TV-14 (DLSV) [BLOCK]
TV-MA ( LSV) [BLOCK]
Owner’s
Manual
PICTURE
CHANNEL SET
[ENGLISH] ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
TV-Y [VIEW]
TV-Y7 ( ) [VIEW]
TV-G [VIEW]
TV-PG ( ) [VIEW]
TV-14 ( ) [VIEW]
TV-MA ( ) [VIEW]
ACCESS CODE
_ _ _ _
TV RATING
MPAA RATING
CHANGE CODE
G [VIEW]
PG [VIEW]
PG-13 [VIEW]
R [VIEW]
NC-17 [VIEW]
X [VIEW]
ACCESS CODE
_ _ _ _
ACCESS CODE
_ _ _ _
PICTURE
CHANNEL SET
[ENGLISH] ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
ACCESS CODE
_ _ _ _
TV RATING
MPAA RATING
CHANGE CODE
TV RATING
MPAA RATING
CHANGE CODE
NEW CODE
COMFIRM CODE
_ _ _ _
_ _ _ _
L2405UF(EN).QX33 04.7.30 2:58 PM Page 4