Onkyo SKS-4700 User Manual

Sks-4700, Instruction manual, Speaker system

Advertising
background image

E

n

Thank you for your purchase of the Onkyo speaker system.
Please read this manual thoroughly before using it.
Following the instructions in this manual will enable you to
obtain optimum performance and listening enjoyment from
your new speaker system.
Please retain this manual for future reference.

Before using this unit

● The speaker cabinet is made of wood and is therefore sensitive to

extreme temperatures and humidity. Avoid placing the speaker
systems in locations subjected to direct sunlight, or in smoky or in
humid places, such as near an air conditioner, humidifi er, bathroom,
or kitchen. Doing so may result in damage to the speaker.

● Place the unit on a rigid, level surface. Placing it on a slanted

surface or weak base not only may cause the unit to fall, but
also results in decreased sound quality.

● Be sure to turn off your amplifi er before connecting the speaker

system. Connecting them with the amplifi er's power on may result
in damage to the amplifi er or the speaker system.

● Keep water or other liquids away from the unit. If water is spilled

into the unit, not only the unit but also the speakers themselves
may be damaged.

Precaution on use

● This speaker system can handle the specifi ed input power when

it is used for ordinary music reproduction. If the following abnormal
signals are fed to the speaker, however, an overcurrent may
fl ow in the internal circuits, causing burning or breakage of the
wires even if the input power is below the specifi ed rating.
1. Noise produced when FM station is not tuned in
2. Sound produced when fast-forwarding cassette tape deck
3. High-frequency sound generated by an oscillator, an

electronic musical instrument, etc.

4. Oscillating amplifi er signals
5. Special test signals produced by audio checking CD, etc.
6. Sound produced when connecting or disconnecting audio

connection cables (Always turn off the amplifi er’s power
before connecting or disconnecting cables.)

7. Howling when a microphone is used

● Do not place magnetic objects such as screwdrivers and iron

parts near the tweeter since they use speakers with strong
magnets. Otherwise, the objects may be attracted, causing
injury or damaging the diaphragm.

Model name

Center speaker system

SKC-4700 × 1

Surround speaker system

SKM-4700 × 2

Connections

● Turn the sound volume to the minimum and disconnect the power

cord from the amplifi er before connecting the speaker cables.

● The nominal impedance of this speaker system is 8 Ω. Use

only amplifi ers capable of handling this impedance.

● Use the supplied speaker cables to connect between speaker’s

input terminals and the amplifi er’s speaker
terminals as illustrated on the right.

● Connect the speaker cables securely to the

terminals, with the core wires twisted
properly. In this case, make sure that the
core wires do not touch each other. Note
that a short circuit in core wires may result
in damage to the amplifi er.

Instruction Manual

SKS-4700

SPEAKER SYSTEM

Connecting to AV amplifi er

Before turning on the amplifi er’s power switch:

● Make sure that the positive (+) and negative (-) speaker cables

do not contact each other. Otherwise, a short-circuit may occur,
causing damage to the amplifi er.

● Be sure to connect the speaker cables with correct polarity

(connect the speaker’s positive (+) and negative (-) binding
posts with the amplifi er’s corresponding speaker terminals).
Reversed polarity results in impaired bass-range reproduction,
causing mislocalization of the sound image. Also, be sure to
connect the Right and Left speakers with the amplifi er’s
corresponding speaker terminals.

● Pull lightly on the speaker cables to ensure that they are

connected fi rmly.

L

R

SURROUND BACK

SPEAKER

SURROUND

SPEAKERS

FRONT

SPEAKERS A

CENTER

SPEAKER

+

+

+

+

+

1. Strip the insulation of speaker cables,

and twist the core wires tightly.

2. While pressing the lever, insert the

wire into the hole, and then release
the lever.

3. Make sure that the terminals are

gripping the core wires, not the
insulation.

Green

Blue

Gray

SKF-4700
Front right speaker

SKF-4700
Front left speaker

SKM-4700
Surround right speaker

SKM-4700
Surround left speaker

AV amplifi er

Red

White

SKC-4700
Center speaker

Advertising