Olympus FL-50R - Manual (Page 30)

30
EN
Custom setup
Custom setup allows you to customize the electronic flash to suit your
preferences.
1
Press and hold the MODE button for
more than 2 seconds, until the setup
mode display appears in the control
panel.
2
Turn dial A to select the setup mode.
3
Turn dial B to select the value.
4
Press the MODE button to confirm the
setup.
Setup mode
Mode display
Value
display Function
Default
value
Dial A Dial B
AF illuminator
AF illuminator is
activated according
to the control from
the camera.
A
AF illuminator is off.
Flash cable
Use this setting
when not using
the flash cable
(attaching to the
hot shoe or using a
clip-on).
on
Use this setting
when using the
flash cable (off-flash
cable).
MODE button
Dial B
Dial A