Oracom PROFI MX160 - Manual (Page 25)

6. Condition for MX160
6.1. Important Warning
RACOM s. r. o. (hereinafter referred to as RACOM) is the exclusive owner of all rights to this operator
manual. All rights reserved. Any duplication of this manual in any way, shape or form, or translation to
any other language (without the prior written consent of the owner of the rights) is strictly forbidden.
RACOM retains the right to make changes to the technical specification or functions of this product or
to terminate production of this product, or to terminate service support of this product without advance
written notice to the customer. RACOM firmware is available free of charge. Source code is the property
of RACOM and is not available to any user. Any commercial use of the software with this licence is
strictly forbidden. Changes to software and documentation are forbidden. RACOM firmware is released
with the intention that it will be useful, however without any specific guarantees.
Under no circumstances is the Racom or any other company or person responsible for incidental, ac-
cidental or related damage arising as a result of the use of this product. The manufacturer shall not
provide the user with any form of guarantee containing assurance of the suitability and applicability for
its application. RACOM products are not developed, designed or tested for use in equipment which
directly affects the health and life functions of humans or animals and neither as part of other important
equipment, and RACOM does not provide a guarantee if company products are used in such equipment.
6.2. Conditions of Liability for Defects and Instructions for Safe Operation
of Equipment.
Please read these safety instructions carefully before using the product:
• Liability for defects does not apply to any product that has been used in a manner which conflicts
with the instructions contained in this operator manual, or if the case in which the radio modem is
located has been opened, or if the equipment has been tampered with.
• The radio modem can only be operated on frequencies stipulated by the body authorised by the
radio operation administration in the respective country and cannot exceed the maximum permitted
output power. RACOM is not responsible for products used in an unauthorised way.
• Equipment mentioned in this operator manual may only be used in accordance with instructions
contained in this manual. Error-free and safe operation of this equipment is only guaranteed if this
equipment is transported, stored, operated and controlled in the proper manner. The same applies
to equipment maintenance.
• In order to prevent damage to the radio modem and other terminal equipment the supply must always
be disconnected upon connecting or disconnecting the cable to the radio modem data interface. It
is necessary to ensure that connected equipment has been grounded to the same potential. Before
connecting the supply cable the output source voltage should be disconnected.
• Only undermentioned manufacturer is entitled to repair any devices.
6.3. Product Conformity
Hereby, RACOM s. r. o., declares that this MX160 radio modem is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. This equipment therefore bears
the CE marking. The warning exclamation mark in the circle marks the radio modem as class 2
25 © RACOM s.r.o. – Wideband modems – PROFI MX160
Condition for MX160