Oricom TP6 - Manual (Page 6)

1.6 Adjustable ringer volume
You can use the RINGER HI/LO/OFF slide switch located
on the side of the telephone to select the incoming ring
volume. Should you not want to be disturbed, use select
OFF position.
1.7 Last number redial
If the number you have dialled is engaged or you were
unable to get through to anybody, simply replace the
handset. The last number dialled will be saved in the
telephone memory. To use the redial facility, proceed as
follows:
1. Lift the handset.
2. Press the REDIAL
button the last saved redial number
will now be dialled.
1.8 Recall button
You will use the RECALL button when using your network
operator’s services such as call waiting etc. If this feature
is not working check the position of the Recall switch on
the side of the phone. In Australia it should be set at 100ms
and in New Zealand 600ms.
1.9 Storing and dialling numbers from
memory
You can store up to 10 numbers in memory and dial those
numbers quickly.
Storing a number in memory:
1. Pick up the handset.
2. Press STORE button.
3. Dial the number (up to 16 digits) you wish to store.
4. Press STORE button and then enter the desired memory
location (0,1 ...9)
5. Replace handset.
5