Optimus 120-2152 - Manual (Page 16)

(New illus)
Notes:
ST appears on the display when an FM signal is received in stereo.
MEMORY TUNING
You can manually store up to 6 AM and 12 FM stations in memory groups.
Each memory group (AM, FMI, and FMII) holds up to six stations. You can
also automatically store the first 6 strong AM and first 6 strong
FM stations in a separate automatic travel programming memory.
Manually Storing Stations
1. Repeatedly press BAND to select the desired memory group
(AM for AM, or FMI or FMII for FM).
2. Use either seek tuning or manual tuning to tune to the station you
want to store.
Note:
To tune both strong and weak FM stations, press LO/DX so DX appears.
To tune only strong FM stations, press LO/DX so DX disappears.
3. Press and hold down the desired memory channel button until the
memory channel number, ch, and the frequency flash once on the
display. The station is stored.
Storing Stations in Automatic Travel Programming Memory
The stereo can store the first 6 strong AM and the first 6 strong
FM stations it finds into its automatic travel programming memory. This
memory is separate from the stereo's memory groups, so it does not replace
the stations you manually stored.
1. Repeatedly press BAND to select the desired band (AM for AM, or
FMI or FMII for FM).
2. Press and hold down TUNE/SEEK TRACK ATP (automatic travel
programming) for about 2 seconds. The stereo displays AS, scans
the selected band, and automatically stores the first 6 strong
stations it finds in automatic travel programming memory.
1. Repeatedly press BAND to select the desired band