Onkyo HTC-V10X - Manual (Page 20)

20
Connections —Continued
■
Connecting the subwoofer (SWA-V10X) and the speakers (ST-V10X)
Before connecting the speakers
Prepare the included speaker cables as follows:
Connecting the front, center, and surround speakers
All the ST-V10X speakers have the same features. Two speakers serve as the front left and right
speakers; one speaker serves as the center speaker; and two speakers serve as the surround left
and right speakers.
1 Remove the tip of the plastic shield of the speaker cables. 2 Twist the core wires.
SWA-V10X
MODEL
MODEL
MODEL
MODEL
MODEL
L
C
R
L
R
FRONT
SPEAKERS
SURROUND
SPEAKERS
Connecting the cords to the
speaker connectors:
1 Press the lever.
2Insert the core
wires into the
slot.
3 Release the lever.
WARNING!
To prevent any cir-
cuit malfunction, do
not let the core
wires of the + and –
(or L and R) cords
contact each other.
NO
• Connect the speaker’s “+” connector to the subwoofer’s “+” connector, and the speaker’s
“–” connector to the subwoofer’s “–” connector using the color-coded speaker cables.
• Connect the colored speaker cables to the “+” connectors.
• If you connect the cords to the wrong connectors (“+” to “–”) or connect the speakers to the
wrong channels (L to R), the audio will sound unnatural.
Front left
speaker
(ST-V10X)
Center
speaker
(ST-V10X)
Front right
speaker
(ST-V10X)
Surround left
speaker
(ST-V10X)
Surround right
speaker
(ST-V10X)
white
green
red
gray
blue
HTC-V10X_En.book Page 20 Wednesday, July 21, 2004 2:49 PM