Omega Vehicle Security LV850 - Manual (Page 8)

LV850 LEVEL SENSOR
4 Connection
Check that the supply voltage corresponds with the voltage
rating shown on the system.
1. Loosen the gland (PG7)(see Fig. 1).
2. Unscrew the cover of the housing (C).
3. Feed the supply cable through the gland (PG7) and the cover (C), or
through the metal coupling supplied as option (see Fig. 2).
4. Connect the cable to the terminal block (TB) (see Fig. 3).
5. Set selector switch (S) to minimum or maximum:
1. - minimum
2. - maximum
6. Connect the supply voltage. LED (red) indicates.
CAUTION
4