Omega Vehicle Security HHTFO - Manual (Page 8)

8
2 U NPACKING
Before using your HHTFO thermometer, check the box content to be sure all items have been included. Your
package should normally contain:
•
HHTFO signal conditioner unit
• Power supply module (universal input: 100-240VAC, 50/60Hz; output: 6VDC). Note: this is not a battery
charger.
• Short extension cord and mating sleeve (should be used to minimize damages to the connector at the
HHTFO interface)
• User manual (this manual)
• Calibration Certificate.
Options:
• Fiber optic temperature sensor probes
• Fiber optic extension cables
• Fiber optic coupling
• RS-232C interface cable
• Battery charger, with 4 AA batteries (Ni-Cd or Ni-MH) (universal input: 100-240VAC, 50/60Hz)
• SD memory card (various capacity, up to 1Gbyte)
• SD card reader (USB interface)
• USB serial adapter cable
• FOB100-SOFT software package (CD)
• Carrying case, for HHTFO and accessories.
Make sure all listed items have been received and are in good condition. Note any evidence of rough
handling in transit; immediately report any damage to the shipping agent. Should a part be missing or
damaged, please contact your distributor immediately. Returns must be made with the original packaging,
accompanied by an authorization number (RMA). Omega Customer Service Department will provide you with
information concerning the return of merchandise; you can contact Omega at (800) 622-2378 or (203) 359
1660.
The carrier will not honour damage claims unless all shipping material is saved for inspection. After
examining and removing contents, save packing material and carton in the event reshipment becomes
necessary.