Omron Healthcare HJ-150 - Manual (Page 8)

15 14
BATTERY INSTALLATION BATTERY INSTALLATION
1.
Remove the screws on the battery cover
located on the back of the unit.
Use a small screwdriver to remove the
screws on the battery cover.
2.
Remove the battery cover.
Low Battery Indicator
When the Low Battery Indicator appears on the display, immediately
replace the battery with a new CR2032 battery.
When the battery is removed from the unit the settings and all data
stored in the memory will be erased. Be sure to write important data
stored in the memory in a notebook.
The battery is installed in the pedometer when this unit is purchased.
3.
Remove the old battery.
Take the battery out with a thin stick is not
easily breakable.
NOTE:
• DO NOT use a pair of metal tweezers
or a screwdriver.
CAUTION
Dispose of the device, battery, and components according to
applicable local regulations. Unlawful disposal be cause
environmental pollution.
CAUTION
Do not throw the battery into fire. The battery may explode.
4.
Insert the new battery.
Place the positive (+) side of the battery
upward. Insert the battery in the direction
of the arrow as illustrated.
5.
Replace the battery cover.
Insert the projected portion of the
battery cover as illustrated.
Tighten the screws on the battery cover.
After installing the battery, set time of day. Refer to “Setting the Time”
on page 7.
HJ-150-IM_Q4.qxd 07.1.25 11:10 AM Page 14