O'Neil MICROFLASH 2TE - Manual (Page 14)

MICROFLASH 2Te PRINTER USER'S GUIDE
12
Audio Indicators
CardReader Audio Indicators
Beep(s) Description Action
1 Printer wakes up. None.
2 Out of paper. Install paper.
3 Low battery. Charge battery.
1 short RF power is on (when
blue, RF power button is
pressed and power was
turned off). None.
2 short RF power is off (when
blue, RF power button is
pressed and power was
turned on). None.
1 long Boot code is starting or
restarting (when
downloading new
firmware). Redownload
firmware.
8 short CRC error in firmware. Redownload
firmware.
Beep(s) Description Action
1 long Bad read. Reswipe card.
2 short Good read. None.