Optimus 120-1998 - Manual (Page 12)

Stereo Cassette (120-1998) Memory Faxback Doc. # 6930
Storing Stations
You can store up to 12 AM and 18 FM stations in memory. You can then
select a stored station by pressing the correct memory location button.
1. Press BAND to select the desired band.
2. Use either of the tuning methods to tune to the station you want to
store.
3. Press and hold the desired memory location button for about 2 seconds
until it sounds a beep.
The band number, the frequency, and the memory location number appear on
the display to show that the station is stored.
Automatically Storing Stations
You can let the stereo automatically store stations. You can then select
a stored station by pressing the correct memory location button.
1. Press BAND to select the desired band (AM1, AM2, FM1, FM2, or FM3).
2. Use either of the tuning methods to tune to the frequency just before
the first station you want to store.
3. Press and hold down AMS for about 3 seconds. The stereo scans the
selected band, then, after about 2 seconds, automatically stores the
first six stations it finds. The stereo beeps as it stores the first
and last stations.
The band number, the frequency, and the memory location number appear
on the display.
4. Press AMS when the stereo has stored the six stations.
Note: If you do not press AMS, the stereo will scan the band again and
tune to each stored station for about 5 seconds.
Selecting a Stored Station
To select a stored station, simply press the desired memory location
button. To scan stations you already stored press AMS.