Onkyo TX-SR605 - Manual (Page 43)

43
First Time Setup—Continued
Notes:
• When the automatic speaker setup is complete, the
Equalizer Settings (page 74) will be set to “Audyssey.”
• You can cancel the automatic speaker setup at any
point in this procedure simply by disconnecting the
setup microphone.
6 The following screen appears.
Move the speaker setup micro-
phone to measurement point

(page 41), then press [ENTER].
Audyssey 2EQ performs more mea-
surements. This takes a few minutes.
7 When the measurements are
complete, the following screen
appears.
Auto Speaker Setup AUDYSSEY
Please place microphone at left end
of listening area at ear height.
Push Enter : Next
Auto Speaker Setup AUDYSSEY
Calculating...
8 When the calculations are com-
plete, the following screen
appears.
Use the Up and Down [ ]/[ ]
buttons to select an option, and
then press [ENTER].
The options are:
Save:
Save the calculated settings and exit
the automatic speaker setup.
Review SP Config:
Review the speaker configuration
settings (see “Reviewing the
Results” on page 45
Review SP Distance:
Review the speaker distance set-
tings (see “Reviewing the Results”
on page 45).
Review SP Level:
Review the speaker level settings
(see “Reviewing the Results” on
page 45).
Cancel:
Cancel the automatic speaker setup.
9 Disconnect the speaker setup
microphone.
Auto Speaker Setup AUDYSSEY
1. Save
2. Review SP Config
3. Review SP Distance
4. Review SP Level
5. Cancel
Auto Speaker Setup AUDYSSEY
Please unplug microphone.