Oki C8800 - Manual (Page 29)

A guide to printing > 29
S
ETTING THE DRIVER DEVICE OPTIONS
This section explains how to ensure that your printer driver can
utilize all of the hardware features installed in your printer.
Accessories such as hard disk, duplex unit (two sided printing),
additional paper trays, etc., will only be usable if the printer
driver on your computer knows they are there.
In some cases the hardware configuration of your printer is
automatically detected when the driver is installed. However, it is
advisable to at least check whether all of the available hardware
features are listed in the driver.
This procedure is essential if you subsequently add extra
hardware features to your printer after the drivers have been
installed and set up.
W
INDOWS
1. Access the driver’s [Properties] window. ( “Changing the
application’s driver settings” on page 24 )
2. Select the [Device Options] tab.
3. In the Windows XP PostScript driver the tab may be called
“Device Settings”.
4. Set the options for any devices you have installed,
including the correct number of paper trays, high capacity
feeder, duplex unit, etc.
5. Click [OK] to close the window and save your changes.
M
AC
OS X
1. Open the Printer Setup Utility (OS X 10.3) or Printer
Center (OS X earlier versions), and ensure that your
printer model is selected.
2. Choose [Printers] → [Show Info] → [Installable Options].
3. Select all hardware options appropriate to your printer,
and click [Apply Changes].