Specifications – Outlaw Audio 7700 User Manual
Page 11
11
Model 7700/7500 Multi-Channel Power Amplifier
Owner’s Manual
Specifications
Model 7500
Model 7700
Power Output
5 x 200 watts @ 8 ohms, FTC: 20 - 20kHz, 0.03% THD,
7 x 200 watts @ 8 ohms, FTC: 20 - 20kHz, 0.03% THD,
All Channels Driven, 5 x 300 watts @ 4 ohms,
All Channels Driven, 7 x 300 watts @ 4 ohms,
FTC: 20 - 20kHz, 0.03% THD, All Channels Driven
FTC: 20 - 20kHz, 0.03% THD, All Channels Driven
Frequency Response
20Hz -20kHz +/- 0.1dB at rated output
20Hz -20kHz +/- 0.1dB at rated output
Total Harmonic Distortion (THD)
Less than 0.03% at rated output,
Less than 0.03% at rated output,
all frequencies, less than 0.005% at 1kHz
all frequencies, less than 0.005% at 1 kHz
Intermodulation Distortion (IMD)
Less than 0.03% from 250mV to full rated FTC power
Less than 0.03% from 250mV to full rated FTC power
Power Bandwidth
5Hz - >100kHz +0/-3dB
5Hz - >100kHz +0/-3dB
Damping Factor
Greater than 400 from 10Hz to 400Hz
Greater than 400 from 10Hz to 400Hz
Crosstalk
Greater than -100dB from 20Hz to 20Khz
Greater than -100dB from 20Hz to 20Khz
Gain
Voltage gain of 34dB (XLR)
Voltage gain of 34dB (XLR)
Voltage gain of 28dB (RCA)
Voltage gain of 28dB (RCA)
Slew Rate
50v/Microsecond
50v/Microsecond
Input Impedance
Nominal 28k ohms
Nominal 28k ohms
Input Sensitivity
1.43 Volts for Full Rated Output
1.43 Volts for Full Rated Output
Remote Trigger Voltage
3 - 32 Volts DC at 5 milliamperes or greater
3 - 32 Volts DC at 5 milliamperes or greater
Dimensions
(HxWxD): 7.75" x 17.2" x 18"
(HxWxD): 7.75" x 17.2" x 18"
Weight
80 lbs
93 lbs
Power Requirements
115VAC, +/- 3%, 50Hz - 60Hz 1800 watts, maximum
115VAC, +/- 3%, 50Hz - 60Hz 1800 watts, maximum
Specifications