Onkyo CR-N7 - Manual (Page 8)

8
Part Names and Functions
The page numbers in parentheses show where you can find the main explanation for each item.
A Remote control sensor (5)
Receives signals from the remote controller.
B INPUT buttons (22, 34, 36, 37)
Enable you to select an input source.
C VOLUME control (22)
Adjusts the volume level.
D STANDBY indicator (22)
Lights up in Standby mode.
E STANDBY/ON button (21, 22, 51)
Press this button to turn on the power to the unit or
place the unit in Standby mode.
F PHONES jack (22)
Connect a headphone mini plug here.
G CD disc tray (24)
Place a CD in the disc tray.
H REPEAT button (30, 31)
Repeats CD playback.
I / buttons (24, 29, 34)
Fast-forward or reverse the track being played.
These buttons also tune in a broadcast station or
move the cursor when you input characters.
J GROUP button (26, 27)
Use this button to select a group on MP3 discs.
K DISPLAY button (25, 28, 39, 42)
Each time you press this button, the information on
the display changes. This button also enables you to
select the input character type.
L TIMER button (21, 44, 45, 48, 49, 52)
Press this button to enable the timer function or set
current time.
M MULTI JOG dial (24)
Turn the dial to select a programmed station, play-
back track or groups. Press it to confirm the current
setting.
N YES/MODE button (21, 29, 30, 31, 35, 38, 42)
Press this button to confirm the displayed settings
for playback and other editing operations.
When input is CD, this button can be used to switch
the playback modes.
O EDIT/NO/CLEAR button (29, 32, 34, 35, 36,
40, 41, 42)
Enables you to adjust settings for playback and
select editing operations. It also cancels the dis-
played setting.
P button (24)
Starts or pauses CD playback.When you press this
button during playback, the unit enters Pause mode.
Q button (24)
Stops CD playback.
R button (24)
Ejects a loaded CD.
Front Panel
1
4 5 8
3 2
6 7 J K M N O P Q R L 9
Display
/