Oki B930 - Manual (Page 11)

11
7. Adjust the feet on the feeder assembly to set
the feeder position parallel to the printer.
8. Connect the feeder power cord into the printer
accessory outlet.
9. Slide the drawer out of the feeder and remove
the shipping screws.
10.Adjust the feeder paper size guides.
11.Load the paper tray.
Attach the Handy Reference
Guide ______________
Remove the backing from the Velcro ® strip on
the back of the Handy Reference Guide and
mount it on the side of the printer.
Computer Connection ____
Network Connection
Connect the Ethernet cable between the printer
and the Ethernet hub or router.
USB Connection
Note: Install the printer software BEFORE
connecting the USB cable: see page 12 and page
13.
Ref
erence
Guide