Oregon Scientific IB368 - Manual (Page 11)

11
2. Press the button once to exit.
NOTE “Auto quit” activates when idle for more than 10
seconds.
SETTING THE CLOCK
NOTE The clock can only be adjusted by minute
increments and not by hour increments, and when the
system is powered off.
1. Ensure the speaker is powered off. Press the
button. Both hands on the clock will flash and the
display’s blue backlight turns on.
2. Use the / buttons to set the time: press the
button once to advance the clock by 1 minute
and press the button to turn the clock back by
1 minute. Press and hold the / buttons down
to set the time faster.
3. Press the button to confirm the newly set time
and exit the clock setting mode. The backlight
turns off.
NOTE No other buttons can be pressed while the setting
clock function is on. “Auto quit” activates when the
function is idle for more than 10 seconds; the last time
that was set prior to idling is not saved.
NOTE The clock will show on the LCD regardless of
whether your wireless speaker is powered on or off.
SYNCHRONIZING WITH THE COMPUTER
Once the iPod is docked into the transmitter dock, the
iPod synchronizes with a computer and music (and
photos with iPod with color display) files can be
transferred from computer to the iPod.
1. Power off the iBall speaker.
2. Plug one end of the Apple iPod Dock Connector
cable that is supplied with the iPod to the transmitter
dock’s 30-pin jack and the other end (Firewire or
USB connector) to the computer. The iPod
synchronizes with your computer. Use Apple
iTunes® or other software on your computer to
transfer music files to the iPod.
3. After file transfer is complete, unplug the Dock
Connector cable from the iPod and press any button
on the iPod to turn on the unit.
4. Operate the iPod and iBall speaker as normal.
MUTE
TIP If you increase (or decrease) the volume while the
speaker is on mute, the Mute function will deactivate
and audio playback can be heard again.
BASS AND TREBLE
Adjusting the wireless speaker’s bass and treble settings
allows the device to playback audio with a different range
of sound and tonal effects.
ADJUSTING BASS
1. Press the button once during playback or when
speaker is on idle or pause. appears on the
LCD.
2. Use the / buttons to increase or decrease the
bass. To continuously increase or decrease the
bass, press and hold the / button down until
the desired bass level is reached. The volume / bass
and treble bar decreases or increases accordingly.
3. Press the button again. appears on the LCD.
ADJUSTING TREBLE
1. Use the / buttons to increase or decrease the
treble. To continuously increase or decrease the
treble, press and hold the / button down until
the desired treble level is reached.
To decrease volume, press
the button once. To
continuously decrease
volume, press and hold the
button down until the
desired volume level is
reached.
1. To mute the sound of
the wireless speaker
during playback,press
the button.
appears on the LCD.
2. To deactivate the mute
function, press the
button again.
reappears.