Olympus DS-333 - Manual (Page 23)

23
Noise Cancel Function
Noise Cancel Function
1 Press and hold the PLAY button
for 1 second or longer while the
file is playing.
Displays currently set Noise Cancel level.
2 Press the PLAY button to choose a
noise cancel level.
Each time you press the PLAY button, the
display changes as follows.
C A N C E L C A N C E L H I H I
0 0 0 0
M
0 0 0 0
S
N O I S E N O I S E
C A N C E L C A N C E L O F F O F F
0 0 0 0 M
0 0 0 0 S
N O I S E N O I S E
1,2
If recorded sound is difficult to hear because of noisy surroundings, adjust the Noise Cancel setting
level. Noise will be reduced in the file when it's played back for clearer sound quality.
If the display is already set to Noise Cancel, start from step 2.
Change the Noise Cancel level within 8 seconds, otherwise the level is
set at the displayed level and the display returns to its original view.
OFF : (Initial Setting)
LOW : Reduces noise.
HI : Reduces more noise.
······················································································································································
Notes
• If you set Noise Cancel to "LOW" or "HI", the setting remains valid until it's set to "OFF".
• If you set it to "LOW" or "HI", the display flashes the Noise Cancel level for about 2 seconds when a file is
played back.
• If you use the Fast Playback and Slow Playback function,you cannot set Noise Cancel to "LOW" or "HI".
(
☞ P.21)