Omega DRN-PS-1000 - Manual (Page 13)

S
PECIFICATIONS
5
11
INPUT POWER
Input Voltage: 115 - 240Vac ±10%
Frequency: 50/60 Hz
Current: 0.400A @ 103Vac
0.190A @ 265Vac
Overvoltage Protection: 275 Volt Varistor
Overcurrent Protection: Fuse TR-5 800mA Time-lag / IEC 127-3
Input Wattage:
26 Watts
OUTPUT POWER
Output Voltage: 24Vdc ±2% @ 850mA (Resistive Load)
Output Wattage: 20 Watts*
* For higher output wattage greater than 20 watts follow the chart on
section 7, Figure 6.2.
Ripple: less than 100 mVrms
Operating Indicator: Front Panel LED
Short-Circuit/
Overload Protection:
Current limiting with automatic short-
circuit protection and temperature
shutdown accomplished by the switcher.
Maximum number of
Signal Conditioner
Depends on module used and
modules powered: configuration (6-10 modules)