Outlaw Audio 770 - Manual (Page 11)

10 Outlaw Audio
Owner’s Manual
11 Model 770/755 Multi-Channel Power Amplifier
Owner’s Manual
Specifications
Model 755 Model 770
Power Output 5 x 200 watts @ 8 ohms, FTC: 20 - 20kHz, 0.05% THD, 7 x 200 watts @ 8 ohms, FTC: 20 - 20kHz, 0.05% THD,
All Channels Driven, 5 x 300 watts @ 4 ohms, All Channels Driven, 7 x 300 watts @ 4 ohms,
FTC: 20 - 20kHz, 0.05% THD, All Channels Driven FTC: 20 - 20kHz, 0.05% THD, All Channels Driven
Frequency Response 20Hz. -20kHz. +/- 0.1 dB at rated output 20Hz. -20kHz. +/- 0.1 dB at rated output
Total Harmonic Distortion (THD) Less than 0.05% at rated output, Less than 0.05% at rated output,
all frequencies, less than 0.005% at 1 kHz. all frequencies, less than 0.005% at 1 kHz.
Intermodulation Distortion (THD) Less than 0.05% at rated output, Less than 0.05% at rated output,
all frequencies, less than 0.005% at 1 kHz. all frequencies, less than 0.005% at 1 kHz.
Power Bandwidth 5Hz - >100 kHz +0/-3 dB 5Hz - >100 kHz +0/-3 dB
Damping Factor Greater than 850 from 10 Hz to 400 Hz Greater than 850 from 10 Hz to 400 Hz
Crosstalk Greater than -90 dB from 20 Hz to 20Khz Greater than -90 dB from 20 Hz to 20Khz
Gain Voltage gain of 28dB. Voltage gain of 28dB.
Slew Rate 50v/Microsecond 50v/Microsecond
Input Impedance Nominal 28k ohms Nominal 28k ohms
Input Sensitivity 1.43 Volts for Full Rated Output 1.43 Volts for Full Rated Output
Remote Trigger Voltage 3 - 32 Volts DC at 5 milliamperes or greater 3 - 32 Volts DC at 5 milliamperes or greater
Dimensions (HxWxD): 7.75” x 17.2” x 18” (HxWxD): 7.75” x 17.2” x 18”
Weight 78 lbs 90 lbs
Power Requirements 115VAC, +/- 3%, 50Hz - 60 Hz. 1800 watts, maximum 115VAC, +/- 3%, 50Hz - 60 Hz. 1800 watts, maximum
Specifications