Orion HPD2 User Manual
Page 2
INTRODUCTION
Thank you for your purchase of the Orion vented subwoofer enclosure
system from Directed Electronics. The Orion vented subwoofer enclosure
system will excite and delight the auto sound enthusiast with years of high
quality audio reproduction.
Orion vented subwoofer enclosure systems are covered by a two-year limited
warranty. Be sure to retain your original sales receipt, and refer to the
warranty section on the back cover of this guide for full details about your
coverage.
PRACTICE SAFE SOUND™
High-powered car audio systems may produce sound pressure levels
that exceed the threshold at which hearing loss may result. They may
also impair a driver’s ability to hear traffic sounds or emergency
vehicles. Use common sense and practice safe listening habits when listening to
or adjusting your audio system. If your subwoofer enclosure is installed in the
passenger compartment, make sure it is restrained (use straps or seat belts—not
provided) from moving in case of an accident.
Your Product Information
Model Number:
Date of Purchase:
INSTALLATION
1. Place the speaker assembly in your vehicle. Common placement will
normally be the trunk, back seat, or back of a van.
2. Connect each speaker to an amplifier output (not supplied), observing that
the polarity markings on the back of the speaker enclosure are connected to
the corresponding polarities on the amplifier.
NOTE: Do not use an amplifier that can drive the speakers beyond their
specifications.
1
G27500.05_11-05.qxd 11/30/2005 1:28 PM Page 1