Orion 52083 User Manual
Page 33
Advertising
33
Other telescope mounts accept commands in the “LX200 Protocol”. For these
mounts, it is not necessary to install the ASCOM platform to have the com-
puter “talk” to the mount. To setup the autoguider for mounts that use the
LX200 Protocol:
1. Connect the SSDSMI-2 to your computer and open the Maxim DL
Essentials software.
2. In the Camera Control Window, click on the Guide tab.
3. Click on the Settings button.
Figure 17.
The Guide tab in the Camera Control Window is where the SSDSI’s
autoguider functions can be accessed.
Figure 18.
The autoguider Settings window is where the Autoguider Output is
defined.
Advertising